TXQ Darksaber Shatered Mandalore Stand [Digital File]

This is a set of 3D files for home printing of the TXQ Darksaber stand.

Printing Recommendations:

• Print the base in an upright position, requires no supports but if you want to add in the overhangs you can.

• Print the blade plug piece in the horizontal position to improve the strength

• I recommend a minimum infill of 25% to give it good weight.

• PLA or PETG work well.

• Maximum layer height: 0.2 mm.

• Minimum of 3 walls, 3 bottom layers, and 3 top layers.

• We recommend printing the Crystals i nresin but FDM can also work.

NOTE: By making this purchase, you agree that these files are for personal use only. You are not authorized to sell 3D prints of these files.